Valens Colligo™ VS2110


Valens Colligo VS2110 is a cost-effective HDBaseT solution, enabling the transmission of uncompressed,high-definition multimedia content (audio & video),control signals, power, and USB 2.0 functionality over a single 30 meter (98 foot) Cat6a standard cable.
The Valens Colligo VS2110 is optimized for the fundamental requirement of low-latency interactivity and flexibility as well as for educational settings, digital signage and industrial PC applications. This optimization enables a number of features such as daisy-chaining of displays. The Valens Colligo VS2110 is also backwards compatible with HDBaseT 1.0 and 2.0 Specifications.

The Valens Colligo VS2110 is comprised of two integrated chips:

Key Features

Parameter Value
Video Interfaces Compliant with HDMI 1.4
EDID adjust mechanism
Glueless interface to TMDS, DDC, CEC, and HPD HDMI signals
HDMI Interface Uncompressed HD video over a 30-meter (98 foot) Cat6a cable:
Up to 165 MHz
Up to 148.5 MHz LVDS
Up to 165 MHz for RGB
Audio Interfaces Standard I2S
Control Interfaces UART, IR, I²C (slave / master), MSIO-6 General Purpose fast serial channels USB 2.0
HDI In/Out Interfaces 8 Gbps inter-device connectivity
HDBaseT packets over inter-chip connection
Glueless interface to Valens Colligo series
System Interfaces RS232, I²C slave, I²C / SPI boot EEPROM
USB 2.0 Configurable as host or device USB port, USB 2.0 standard compliant
Power PoE (802.3af), POE+ (802.3at), PoH
Data Rate Auxiliary channel data rate of 250Mbps Full Duplex
HDCP Supported on HDMI interfaces
Networking End device functionality for HDBaseT 2.0 networking
Daisy Chain Support for daisy-chain source and sink connectivity
Power Consumption Sleep – Low power mode #1 – 270mW (RX), 220mW (TX)
Max power consumption – 4.3W (RX), 2.7W (TX)
Junction Temp. -40oC – +125oC
Dimensions Valens Colligo VS2110TX – Heat slug BGA 21mm x 21mm
Valens Colligo VS2110RX – Heat slug BGA 23mm x 23mm
Ball pitch – 1mm


The following block diagram illustrates the major VS2110 components: